Philips M1190A Adult Finger Clip SpO2 Sensor, 12pin, 3m
1. Description: M1190A For Philips finger clip SpO2 sensor, 12 pin, L=3m
2. Connector Guide: HP 12 pins
3. Compatibility: Original Philips part number: M1190A, This sensor connects directly to the bedside monitor without an extension cable. It works with the following SpO2 monitors: For philips 78352A/C, 78354A/C, 78834C, M1020A, M1025A/B, M1205A, M1350B, M1722A/B, M1723A/B, M2475B, V24E.
4. Types: Adult finger clip SpO2 sensor, Adult Silicone Soft Rubber SpO2 sensor, Pediatric Clip SpO2 sensor, Pediatric Silicone SpO2 sensor, Neonate Wrap SpO2 sensor, Neonate Y type SpO2 sensor, Adult Ear Clip SpO2 sensor, Animal ear clip SpO2 sensor;
Product Technical Parameter
| LED | LED | 660nm normal |
| Infrared | 905nm normal |
| Text Range | Oxygen Saturation(%SpO2) | 0% to 100% |
| | Pulse Rate(bpm) | 30 to 245 |
| Accuracy | SpO2 | ±1%(90~100%) |
| ±2%(80~90%) |
| ±3%(below 70%) |
| Pulse Rate | 2bpm(30-250bpm) |
| Storage Environment | -10℃~+40℃ |
| Operating Temperature | ±5℃~+40℃ |
| Operating/Storage/Transportation Humidity | 0%-80% |
| Hyperbaric Pressure | 86kPa-106kPa |
Product Photo
Instruction
1. Hold the sensor with its opening towards the patient's index finger, toes, palm or sole. The side with a finger or toes sign is placed on the top, detail is as follows:
2. Put the patient's measurement part into the sensor until the tip against at the end of the sensor.
3. Adjust the measurement part to be placed evenly on the middle base of the sensor.
4. Direct the cable along the top of the patient's hand or foot.
5. Plug the sensor into the proper oximeter and verify operation as described in the oximeter operator's manual.
6. Inspect the sensor site every 2 hours for skin integrity.
Product Process
1.0 The usage range
This specification suited for customer's appointed models.
2.0 Usage condition(GB9706.1-2007 10.2.1)
2.1 Rated temperature:25ºC.
2.2 Operation environment:10ºC~40ºC.
2.3 Storage and transport method:individual moistureproof package for each Product,Transport under the conditions of ambient temperature.
3.0 Construction
3. Appearance requests:
3.1 a The cable is round and glossy,the color uniformity, the jacket is ok,no Disrepair,no dirt,no disfigurement,etc.
3.1 b The surface of the connector is glossy, no burr,no obvious machine scar,no
disfigurement,no modification,no dirt,no metal rust etc.
3.1 c (EC13:2002 4.1.1.5/IEC60601-2-47 6.1aa)Clear dot-color and characters, thecorresponding printing should be correct.(EC13:2002 4.1.1.5/IEC60601-2-47
3.1 d Product labels for use in line with the requirements of EC53-1995 4.1
3.1 e Product labels and graphics in line with the engraved die EN980-2008 / EU CE requirementf Product cleaning, disinfection and chemical resistance in ine with the requirements of EC53-1995 4.3
3.2 Size requirements:
To check the Size according to the drawing which was issued by the engineer. (The important size requirements, please notify it on time)
3.3 Packaging requirements:
The packaging in accordance with the requirements of the engineer drawin(Incase of special packaging requirements, please promptly notify it.)
4.0 Technical requirements
4.1:ANSI/AAMI EC53:1995/(R)2001
ECG executive standards:ANSI/AAMI EC53:1995/(R)2001 Note:ANSI/AAMI EC53:1995/(R)2001 Standard the not description
general requested by the executive.
4.2 Customer special electrical and mechanical performance requirements.
(Please check the Implementation standards in remarks.)
Order Details:
1. Please let us know the product model you need
2. We will make proforma invoice for you.
3. Checking and confirm the invoice.
4. After payment, all goods will be sent to you in 5-7 days as usual.
5. OEM/ODM is welcomed.
Payment:
T/T, Western Union.
Shipment:
1. EMS. DHL. UPS. FedEx, TNT.
2. It will take 3~7days for shipping (depend on country distance).
3. Any import charges or fees are buyer's responsibility.
4. We will provide you the tracking number once the goods sent, tracking it until you get the package.
5. The shipping cost will be on clients' side.
We are Professional OEM/ODM Medical Cable Manufacturer,please feel free to contact us:
Contact: Bella
Cell phone:+86 17347272725
