Shenzhen Rorui-Med Technology Co.,Ltd
Service to Create Value
Add to Cart
Edan M8/M9 Adult silicone soft SpO2 Sensor, 6pin, 2.8m
| Compatible Model | M3, M3A, M3B, M8, M8A, M8B, M9, M9A, M50, M80, IM8, IM8A, IM8B, IM9, IM9A, IM50, IM80 | ||
| Sensor Type | Adult/Child/Infant/Neonate/Multi Y/Ear clip/Animal | ||
| Probe House | ABS Shell ( Finger Clip) | ||
| Cable Material | TPU Light Gray Jacket, 4.0mm Diameter | Sensor Connector | gold pin |
| LED | 660nm/905nm | Photo Detector | 8mm²(size) |
| Cable Length | 2.7M | Package | 1 pc in a opp bag |
| LED | LED | 660nm normal |
| Infrared | 905nm normal | |
| Text Range | Oxygen Saturation(%SpO2) | 0% to 100% |
| Pulse Rate(bpm) | 30 to 245 | |
| Accuracy | SpO2 | ±1%(90~100%) |
| ±2%(80~90%) | ||
| ±3%(below 70%) | ||
| Pulse Rate | 2bpm(30-250bpm) | |
| Storage Environment | -10℃~+40℃ | |
| Operating Temperature | ±5℃~+40℃ | |
| Operating/Storage/Transportation Humidity | 0%-80% | |
| Hyperbaric Pressure | 86kPa-106kPa | |
1. Hold the sensor with its opening towards the patient's index finger, toes, palm or sole. The side with a finger or toes sign is placed on the top, detail is as follows:
2. Put the patient's measurement part into the sensor until the tip against at the end of the sensor.
3. Adjust the measurement part to be placed evenly on the middle base of the sensor.
4. Direct the cable along the top of the patient's hand or foot.
5. Plug the sensor into the proper oximeter and verify operation as described in the oximeter operator's manual.
6. Inspect the sensor site every 2 hours for skin integrity.
1. We will ship the item within 1-2 weeks after confirmation of order, kindly leave us your shipping address and contact number, both are very important, thank you!
2. Shipping to all over the world by UPS/DHL/FedEx (5-10 days), and pls contact us for the shipping rate.
If you have any special requirement, please feel free to contact our staff immediately, or leave the note in Paypal after your payment,, we will offer you the satisfy shipping.
3. We will send you the tracking number after shippment, you also can ask us for the tracking service.
4. If you haven't received items in 2-3 weeks after delivery, please contact us immediately.
We accept payment by Paypal, Western Union and bank wire .
1.Patient monitor accessories: Reusable spo2 sensor,disposable spo2 sensor,spo2 adapter cable,ECG cable,Holter ecg cable leadwires,EKG cable,IBP cable,Disposable transducer cable,NIBP cuff and Tubes,Temperature probe...
2.Electrocardiography machine: EKG cable,Limb clamp ECG electrodes,Suction Chest ECG electrodes...
3.Pulse Oximeter: Fingertip pulse oximeter,Palm pulse oximeter...
4.Ultrasound Probe: Ultrasound probe,Fetal probe and transducer,TOCO probe and transducer...